Various testing equipment such as shot bags / twin tires and impact frame, 227 and 2260 g steel ball and ball drop impact devices, boiling test instruments for laminated glass, flatness measurement instruments for tempered glass, insulating glass dew point meters and head-form。
Shot Bag
1) Weight:45kg±0.1kg 46kg±0.1kg
2) Height: 330mm ± 13mm
3) Max diameter: 250mm
4) Lead sand size: 2.5mm

Pneumatic Tyres Impactor
Pneumatic Tyres Device for Pendulum Test of Glass In Building According to BS EN 12600
Reference standard:
BS EN 12600:2002
Glass in building – Pendulum test – Impact test method and classification for flat glass
MS 1498:2017
Safety glass in building – Specification
Technical Parameters:
Weight 50 kg ± 0.1 kg
Tire pressure: 0.35Mpa ± 0.02Mpa
Type: 3.50-R8 4PR

Impact Testing Machine
Frame Size: 1900mm*1500mm*3570mm
Samples Size: 1930mm*864mm
Lift: Electric
Release: Auto
Maximum impact height: 1200mm (customized)
Rubber Pad Width: 15mm
Rubber Pad Thickness: 3mm
Rubber Pad Hardness: Shore A50


Drop Ball Impact Test Machine
Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object
Hardness steel ball:
a) 2260g ± 20g, diameter of approximately 82.5mm
b) 227g ± 2g, diameter of approximately 38 mm
c) 1040g ± 10g, diameter of approximately 63.5 mm
d) 508g±3g, diameter of approximately 50 mm
Frame Height: 1000mm, 5000mm, 12000mm, Customized
Automatic release and lift. Power: 220V 50Hz 580W
Supporting fixture:
a) Support Size: 350mm*350mm and 660mm*660mm (Customized)
b) Frame width 15mm
c) Steel box height 150mm
d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50
e) Interposed sheet of rubber: thickness 3mm, hardness shore A50
Applied Test Pieces Size: 300mm*300mm 610mm* 610mm





Pummel Test Equipment for Laminated Glass
Pummel Test Device
Application: Pummel test equipment for detect the adhesion of the interlayer of the laminated glass.
Data:
Hammer head diameter: 30mm
Impact Distance: Adjustable
Voltage: 380v
Whole machine voltage: 0.80KW
Test machine size: 1250 mm *1130 mm *870 mm long *wide *high
Control cabinet size: 560mm * 450mm * 1090mm long * wide * high
Knocking frequency: 220 times/min
Maximum sample size: 300 mm x 300 mm
Maximum knock size: 300 mm x 200 mm
Sample applicable thickness: 4mm-6.5mm

Water bath apparatus of Boil test for safety glazing materials in Building
Laminated Glass Boiling Test Device
Reference Standard: AS/NZS 2208 Safety glazing materials in buildings
Power: 220V 50Hz 3Kw (Customized)
Outside Size: 400mm*255mm*480mm
Inside Size: 400mm*255mm*480mm
At most 6 samples with 300mm*300mm
Scope:
Determining the effect of exposure of safety glazing materials to temperature and humidity condition by boiling
Principle:
Specimens are immerse in hot water and boiling water for specified period of time and inspect bubbles and other defects
Apparatus:
The apparatus include two water baths, each of sufficient size to hold the test specimen fully immersed vertically on edge for the duration test
Samples:
Three specimen of size 300mm*300mm manufactured in a manner identical with impact test specimens and of like thickness shall be tested. These specimens may be cut from production samples of the size and thickness submitted for impact testing. Test specimen may be cut from a similar original sheet of annealed laminated glass
Procedure:
1): Immerse the specimens vertically on edge in a bath of water maintained at a temperature of 66°C ± 3°C for 3 min
2) Quickly transfer the specimens to a bath of water maintain at boiling point. Immerse the specimens vertically on edge for 2 h
3) Remove the specimens and examine for the bubbles and others defects

Insulating Glass Dew Point Inspection Measurement Tool
Related Standard:
ISO 20492 Glass in buildings — Insulating glass
GB / T 11944 Insulating glass
Data:
Measuring probe operating temperature: -80°C ~ 100°C
Tube height: 300mm
Tube diameter: 50mm
Temperature resolution: 0.1 °C
Samples size: 510mm × 360mm
Control box size: 470mm × 550mm × 700mm
Test environment: temperature: 23 °C ± 2 °C; relative humidity: 30% to 75% RH
Operating voltage: AC220V 50Hz
Equipment power consumption: ≤ 1KW

Tempered Glass Flatness Testing Instrument
Handheld Tempered Glass Unevenness Field Measurement Tool

Equipment List:
U Value Meter For IG
Ball Drop Test Device:
Pummel Test Device:
Shot Bag Impact Testing Frame:
Head Form Test Device
PV Load Test Equipment
Pneumatic Tyres Device
Forced Entry Resistant Glass Test Device
Insulating Glass Dew Point Meter
Hard/Soft Pendulum Shock Test for Lifts
Laminated Glass High Temperature Test Oven
Tempered Glass Flatness Measuring Instrument
Impactor for building Glass and Metal Guardrail
Hard and Soft Body Impactors for Opaque Wall Components
Portable on-site Comprehensive Measurement Instrument for Energy-saving Glass