• Static Load Test Equipment

    Static Load Test Equipment Mechanical Load Test Apparatus of Crystalline Silicon Terrestrial Photovoltaic (PV) ModulesSolar Panel and PV Module Testing Equipment Reference Standard:IEC 61215 Crystalline Silicon Terrestrial Photovoltaic (PV) Modules Size: 6425 mm2000 mm3490 mmSamples: 1643 mm*991 mm~2009 mm*1027mm (Customized)Source: SandbagLoad: 2400Pa 5400Pa 8100Pa 10000Pa (Customized)Precision: + 3%Power: 380V/50HZ 3000WWeight: 4500kg .PurposeThe purpose of this test is to determine the ability of the module to withstand wind, snow, static or ice loads. Apparatusa) a rigid test base which enables the modules to be mounted front-side up or front-side down. The test base shall enable the module to deflect freely during the load application.b) Instrumentation to monitor the electrical continuity of the module during the test.c) Suitable weights or pressure means that enable the load to be applied in a gradual, uniform manner. Procedurea) Equip the module so that the electrical continuity of the internal circuit can be monitored continuously during…

  • Headform

    Headform Impact Test Device Safety glazing head-form test device Related Standard: ISO 3537 Road vehicles –Safety glazing materials — Mechanical tests – Clause 10 Head-form test -ISO 15082 Road vehicles — Tests for rigid plastic safety glazing materials GB/T 5137.1 Road vehicles–Safety glazing materials –Part 1: Test methods for mechanical properties Between the spherical part and the cross-beam, there is a neck shaped intermediate piece and on the other side of the cross-beam, a mounting Rod. Application: The purpose of this test is to verify the compliance of glazing with the asking relating to the limitation of injury in the event of impact of the head against the windscreen, laminated glass and glazing of glass-plastic and rigid plastic other than windscreens, together with The double-glazed units used in the side windows. Data: Head Weight: 10 kg Head Size: 500 mm * 932 mm Impact height: < 1.5 m Samples size:…

  • Balustrade Impact Test Device

    Glass and Metal Guardrail Impact Reference Standard: JIS A 6601 JG/T 342 Hard Body Impactor Impactor: Solid steel ball with hook Mass: 1040 g, diameter: 63.5mm Soft Body Impactor shot bag Weight: 45 kg Height: 330 mm Max diameter: 250 mm Structure: leather bag filled with lead shot,wrapped with fiberglass tape. Leather thickness: 1.5 mm Lead sand size: 2.5 mm

  • Pendulum Shock Device

    Pendulum Shock Device for Lifts Pendulum shock device for Impact test of elevator landing door, glass door and car wall Related Standard:GB 7588-2003 Safety rules for the construction and installation of electric liftsEN 81-1 Safety rules for the construction and installation of lifts – Part 1: Electric lifts Soft pendulum shock deviceHeight: 330mm ± 15mmMaximum diameter: 240mm±15mmWeight: 45kg ± 0.5kgMaterial: leather bagFiller: diameter 3.5mm ± 1mm lead sand Hard pendulum shock deviceHeight: 330± 15mmMax diameter: 240±10mmWeight: 10kg ± 0.1kgMaterial: according to ISO standardFiller: 3.5mm ± 0.25mm

  • Two Pneumatic Tyres

    Pendulum Impactor for EN 12600 Pneumatic Tyres Device for Pendulum Test of Glass In Building According to BS EN 12600 Reference standard:BS EN 12600:2002Glass in building – Pendulum test – Impact test method and classification for flat glassMS 1498:2017Safety glass in building – Specification Technical Parameters:Weight 50 kg ± 0.1 kgTire pressure: 0.35Mpa ± 0.02MpaType: 3.50-R8 4PRSample size: 876 mm ± 2 mm * 1938 mm ± 2 mmInside the sample frame: 847 mm ± 5 mm * 1910 mm ± 5 mmImpact frame footprint: 1300 mm*3900 mm*3700 mmLifting mode: manual, automatic optionalImpact body release mode: manual, automatic optional

  • Steel Ball 2260 g 227 g 1040 g

    Hardened Steel Ball 2260 g 227 g 1040 g 227 g and 2260 g of Hard Steel ball for Mechanical Tests of Safety Glazing Materials Function: Hardened Steel ball for Impact Tests of Safety Glazing Materials Material: Bearing steel Hardness: HRC 58~64 Steel Ball: 2260g 82mm Steel Ball: 1040g 63mm Steel Ball: 508g 50mm Steel Ball: 227g 38mm

  • Tempered Glass Flatness Measure

    Measurement of arcuate form and wave form of tempered glass Related standard: 1) GB 15763.2 Safety glazing materials in building- Part 2: Tempered glass Clause 5.4 Camber measuring 2) AS NZS 2208 Safety glazing materials in buildings Clause 2.5 Flatness requirements Technical Data: Resolution: 0.01mm Measuring Span: 30mm-1000 mm ( Customizable) Working Temperature: 0~+40°C Working Humidity: ≤80% We provide exquisite packaging customized for customers. Instruction: Adjust the measurement and set up to track the maximum data. Adjust the span of the support block according to request. Adjust the position of measuring head, to ensure that the measuring head is beyond 2mm-3mm of the plane of three support feet. Gently stick the surface of the glass to ensure that three supporting feet are able to touch the glass. Slide the measure location and read the data. Product features: Continuous measurement and monitoring of the flatness of the glass, data display and…

  • Shot Bag Impactor

    Shot Bag Impactor 45 kg 46 kg Weight: 45kg ± 0.1kg 46kg ± 0.1kg Height: 330mm ± 13mm Max diameter: 250mm Lead sand size: 2.5mm Customized: 25kg 48kg Related Standards:1) AS/NZS 2208 Safety glazing materials in buildings – Appendix D: Impact Test2) GB 15763.3 Safety glazing materials in building Part 3: Laminated glass – Appendix C: Test device for the impact performance of shot bag3) ANSI Z97.1 Safety Glazing Materials Used in Buildings – Safety Performance Specifications and Methods of Test – Clause 5.1: Impact Test4) ASTM : E2353 Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades – Clause 7.3 Shot Bag, Traction and Release System Impact Testing Machine Application:Determining the resistance of glazing materials to impact by the penetration method Test Frame:Frame Size: 1900mm × 1500mm × 3570mmSamples Size: 1930mm × 864mmLift: ElectricRelease: AutoMaximum impact height: 1200mm (customized)Rubber Pad Width: 15mmRubber Pad Thickness:…

  • Drop Ball Test Machine

    Drop Ball Test MachineDrop Ball Impact Specimen Support and Frame for Laminated Glass Related Standard: ISO 3537Road vehicles — Safety glazing materials — Mechanical tests– Clause 6: 227 g ball test, Clause 7:2260 g ball test GB 15763.3 Safety glazing materials in building Part 3:Laminated glass–Appendix B Drop ball impact specimen support Drop Height: 1000mm, 5000mm, 12000mm, CustomizedAutomatic release and lift. Power: 220V 50Hz 580W Supporting fixture:a) Support Size: 350mm350mm and 660mm660mm (Customized)b) Frame width 15mmc) Steel box height 150mmd) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50e) Interposed sheet of rubber: thickness 3mm, hardness shore A50Applied Test Pieces Size: 300mm300mm 610mm 610mm Qinhuangdao Yuanchen Technology Equipment Co., Ltd. is mainly engaged in the development, design and processing of sheet metal stamping parts, metal forming molds and building materials inspection and testing equipment. Main business: Processing Service:Laser cutting processing services for various metal plates such as stainless steel, carbon…

Contact Us

0335-7963298