ECE R43 Testing Equipment

Fragmentation test tools

Mechanical strength test equipment according to ECE R43

Height: 1 m, 3 m, 5 m, 12 m, customized

Samples Applied Test Pieces Size: 300mm*300mm and 610mm *610mm

Electromagnetic

Head-form Weight: 10kg
Head-form Size: 500mm932mm Impact height: < 1.5m Samples size: 1100mm500mm
Frame size: 1376mm670mm320mm

Data：

Scope:

Determining the effect of exposure of safety glazing materials to temperature and humidity condition by boiling

Principle:

Specimens are immerse in hot water and boiling water for specified period of time and inspect bubbles and others defects

Apparatus:

The apparatus include two water baths, each of sufficient size to hold the test specimen fully immersed vertically on edge for the duration test.

Samples:

Three specimen of size 300mm*300mm manufacture in a manner identical with impact test specimens and of like thickness shall be tested.
These specimens may be cut from production samples of the size and thickness submitted for impact testing.
For heat strengthened or toughened laminated glass, test specimen may be cut from a similar original sheet of annealed laminated glass

Procedure:

Immerse the specimens vertically on edge in a bath of water maintained at a temperature of 66°C±3°C for 3 min
Quickly transfer the specimens to a bath of water maintain at boiling point. Immerse the specimens vertically on edge for 2 h
Remove the specimens and examine for the bubbles and others defects

Portable on-site Comprehensive Measurement Instrument for Energy-saving Glass

It is applicable to the field test for opt thermal parameters of energy-saving glass installed and or to be installed
The data that the instrument can measure is: thermal parameters, optical parameters, light transmittance, light reflectance, shading coefficient, U value, LSG, Low-E position, E value, space thickness, overall thickness, glass thickness
The types of glass that the instrument can measure are:
Single pane, Laminated glass, Uncoated insulated glass, Coating on both sides and below, Coating on more than two sides, Coating on both sides and below, Coating on more than two sides, Vacuum glazing

U Value Meter For IG

This instrument is suitable for single Low-E glass, double glazing or triple glazing glass which the number of Low-E side is less than two.

Ball Drop Test Device: